Go HERE for more filter element information. The included Radium Engineering fuel filter mounts in the stock filter location using a specifically designed Nissan bolt-on billet mount.ĭepending on the kit selected (-03,-05), the fuel filter will be assembled with a choice of different elements. The fuel lines clear the OEM fuel pump cover and do not require any cutting or drilling to get them past the fuel tank. The feed and/or return hose can be easily modified for installation of an in-line flex fuel sensor. The kit includes -8AN (1/2") feed hose that runs from the fuel pump hanger through the provided fuel filter. A -8AN 90 degree PuskLok hose end is included for connecting to an -8AN male aftermarket fuel rail fitting (not included). A -6AN (3/8") fuel hose runs from the FPR (not included) to the fuel pump hanger return port. A -6AN 90 degree PuskLok hose end is included for connecting to an -6AN male aftermarket FPR fitting (not included). The fuel lines run though billet aluminum fuel brake line retainers. These plumbing kits include everything required to plumb the fuel system between the Radium pump hanger and the fuel rail. This kit is NOT designed for the stock fuel rail. Select one for each aftermarket pump.Ģ0-0703-0X FUEL HANGER PLUMBING KIT, EARLY NISSAN Universal fuel pump wiring kits can be found HERE. It is recommended to upgrade OEM wiring to ensure the pumps are receiving full power and operating at their full potential.ģ. Single Walbro GSS342 (255LPH) fuel pump installations can re-use the OEM fuel pump wiring.Ģ. Furthermore, the in-tank wiring is insulated with high quality chemically resistant ETFE.ġ. Non-conductive anodized aluminum acorn nuts are provided to prevent any accidental short circuiting.Įlectrical hardware is included for the fuel pump(s) and sensors. These serviceable connections are hermetically sealed and impervious to all standard and exotic fuels. The custom designed stainless steel electrical studs easily handle the high current demand that compact multi-pin bulkhead connectors lack. P/N: 20-0730-00 (shown below) can be used with the AEM 50-1000, AEM 50-1200, Walbro GSS342, or other pumps with the same physical shape and electrical connector. Not sure which pumps to choose? CLICK HERE or email us: kit will have enough parts to run 1, 2, or 3 fuel pumps but the user must supply their own compatible fuel pumps. Use the information below to help make your selection. Choosing the pump(s) is based on the expected engine power output and the fuel type (gasoline, E85, etc.). There are many different combinations of fuel pumps available described below. The fitting ports are machined low enough to clear the unibody sheet metal. The return port also uses a 8AN ORB female port on the top plate.Īdapter fittings are included for easy connection to the factory fuel lines.Īlso included in all variations of the kit are adapter fittings for connecting aftermarket -AN style hoses. And because of the integrated check valves, fuel pump staging is permitted. The fuel pump outlets merge into a single 8AN female port on the top plate. The functionality of the factory Nissan fuel level float and low fuel switch are retained. Fuel is drawn in through the mesh filter located at the bottom of the assembly, shown below. The fuel pumps are positioned in the factory collector bowl. No cutting or modifying of the vehicle's sheet metal or fuel tank is required for installation. It can be configured with 1, 2, or 3 aftermarket fuel pumps to meet the fuel demands of various high performance engines. This Radium Engineering fuel pump hanger replaces the stock fuel pump module in the Nissan vehicles listed above. Nissan R32 Skyline (All RHD/LHD, excludes GT-R) Nissan S13 240SX (All models/trims/RHD/LHD) Nissan S13 200SX (All models/trims/RHD/LHD) Nissan S13 180SX (All models/trims/RHD/LHD) Nissan S13 Silvia (All models/trims/RHD/LHD) This product is compatible with the following vehicles:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |